Product Description
10Gb/s Tunable DWDM 80km XFP Optical Transceiver Module
Features
(1) Supports 9.95Gb/s to 11.3Gb/s bit rates
(2) Monolithically integrated full C-band tunable transmitter and APD receiver
(3) 50 GHz ITU channel spacing with integrated wavelength locker
(4) Up to 80km on 9/125µm SMF
(5) Support Digital Diagnostic Monitoring interface
(6) Hot-pluggable XFP footprint
(7) No Reference Clock required
(8) Metal enclosure, for lower EMI
(1) Supports 9.95Gb/s to 11.3Gb/s bit rates
(2) Monolithically integrated full C-band tunable transmitter and APD receiver
(3) 50 GHz ITU channel spacing with integrated wavelength locker
(4) Up to 80km on 9/125µm SMF
(5) Support Digital Diagnostic Monitoring interface
(6) Hot-pluggable XFP footprint
(7) No Reference Clock required
(8) Metal enclosure, for lower EMI
(9) RoHS compliant and lead-free
(10) Supports Line-side and XFI loopback
(11) Standard bail release mechanism
(12) Single +3.3V power supply
(13) Power dissipation <3.5W
(14) Case operating temperature
Commercial: 0 ~ +70oC
Applications
DWDM 10GBASE-ZR/ZW & 10G Ethernet
DWDM SONET OC-192&SDH STM-64
10G Fiber Channel
Notes:
1. When a tunable module is plugged in for the first time, it will go to a default channel, or Tx_DIS asserted it will go to a standby condition. HTXF-DT96-80C default channel is 1568.36nm, compatible with channel range from 1 to 99
2. When the module is power cycled it will automatically go to the last channel selected, or Tx_DIS asserted it will go to a standby condition. If Tx_DIS asserted, the last channel selected will be cleared, and a valid new channel command will be required to set a channel.
3. If the Tx disabled and then re-enabled, the module returns to the last channel selected.
1. When a tunable module is plugged in for the first time, it will go to a default channel, or Tx_DIS asserted it will go to a standby condition. HTXF-DT96-80C default channel is 1568.36nm, compatible with channel range from 1 to 99
2. When the module is power cycled it will automatically go to the last channel selected, or Tx_DIS asserted it will go to a standby condition. If Tx_DIS asserted, the last channel selected will be cleared, and a valid new channel command will be required to set a channel.
3. If the Tx disabled and then re-enabled, the module returns to the last channel selected.
Company Information
Product Range
Certifications
Packaging & Shipping
FAQ
Contact HTFuture
Ivy Huang is International Sales at HTFuture. More information about HTFuture’s product is available by emailing Ivy or skype: sales6@htfuture.com
Related Product
(1) Optical module (1.25G SFP, 10G XFP, SFP+, CWDM/DWDM, BIDI, 25G, 40G, 100G Module etc),
(2) Wavelength division multiplexer (WDM/CWDM/DWDM/OADM)
(3) Optical Transport Network Product (OEO, OTU, OBP, OLP, EDFA etc)
.jpg)
没有评论:
发表评论